Acid hydrolysis
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Acid Orange7 Dye
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Activated carbon
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018-2019, Pages 280-289]
Adhesion
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Adhesion strength
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Adhesion strength
An Investigation into the Effect of Moisture Content on Adhesion strength of Half-polyester and Polyurethane Clear Paints Applied to Wood Surface [Volume 33, Issue 4, 2018-2019, Pages 511-521]
Adsorption
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Adsorption
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018-2019, Pages 280-289]
Adsorption
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Adsorption Isotherm
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Adsorption Isotherm
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Alnus subcordata and Alnus subglotinosa
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
Alpha-cellulose
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Analytical Hierarchy Process
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Aspect ratio
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
B
Bagasse
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Bagasse
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Bagasse pith
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Ballistic impact
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018-2019, Pages 347-358]
Bending strength
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Bending strength
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Biohydrogel
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Bio-refinery
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Bleached Pulp
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Box-Behnken design
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Broke Fibers
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
C
Calcium carbonate
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018-2019, Pages 12-24]
Carboxymethyl cellulose
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Carting Industry
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Cationic poly acrylamide
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018-2019, Pages 428-437]
Cationic starch (CS)
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Cationic starch. Nano silica
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018-2019, Pages 428-437]
Cellulase Enzyme
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018-2019, Pages 381-390]
CELLULOSE
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018-2019, Pages 428-437]
Cellulose Nanocrystal
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Cellulose nanofiber (CNF)
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Cellulose nanofibers
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Cellulose nanofibers aerogels
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2018-2019, Pages 531-543]
Cellulosic fibers
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018-2019, Pages 347-358]
Cement
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Central composite design
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Chemical Oxygen Demand
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
CMP
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018-2019, Pages 38-49]
CMP pulp
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018-2019, Pages 323-336]
Collar
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Colloidal charge
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Compost
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Cotton linter
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
D
Date palm
Comparison of stiffness parameters of two kinds of date palm using nondestructive test [Volume 33, Issue 1, 2018-2019, Pages 133-141]
DEAMATEL technique
Identification and Prioritization of factors affecting competitiveness of Classic Furniture by using ANP (Case study: Tehran Province) [Volume 33, Issue 2, 2018-2019, Pages 179-195]
DECAY
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
Defect
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Deinking
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Density
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Dimensional stability
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
DTA
Thermal analysis by TGA and DTA method of wood-polymer of furfurylated beech and fir wood [Volume 33, Issue 4, 2018-2019, Pages 501-510]
Dynamic- Mechanical Analysis
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
E
Ecotoxicological
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Eldar pine
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018-2019, Pages 402-416]
Electrospinning
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Eucalyptus
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
F
Fiber fines
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Fire retardant
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Flexographic printing
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Flexural modulus
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
FLOCCULATION
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018-2019, Pages 256-269]
Fourier-transform infrared spectroscopy
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018-2019, Pages 142-154]
FT_IR spectrum
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018-2019, Pages 270-279]
Furfural
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Furniture
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
G
Gas chromatography
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
H
Hemp stalk
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Human Capital
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
Hydrodynamic specific volume
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Hydroxymethyl furfural
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
I
Impact resistance
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
Index
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Inhibitors
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Ink
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Internal bonding
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018-2019, Pages 155-165]
Internal bonding
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Internal bonding
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018-2019, Pages 270-279]
Internal bonding
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
K
Keywords: Urea formaldehyde adhesive
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018-2019, Pages 270-279]
L
Liner and Flute Paper
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
M
Mass spectrometry
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
MECHANICAL PROPERTIES
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Mineral fibers
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018-2019, Pages 347-358]
Modulus of rupture
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018-2019, Pages 155-165]
N
Nanocellulose
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018-2019, Pages 12-24]
Nanocellulose
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Nanocomposites
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Nanofibers
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Nano gel wollastonite
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Nano wollastonite
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Natural Poly lactic acid polymer
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
Neutral Sulfite Semi-chemical Pulp
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
Non-destructive testing
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
O
OCC pulp
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018-2019, Pages 256-269]
OCC pulp
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018-2019, Pages 381-390]
Old corrugated container(OCC)
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Old newspaper
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Optical and mechanical properties
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Optical and mechanical Properties
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018-2019, Pages 38-49]
Optical properties
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Optical properties
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018-2019, Pages 290-299]
Optical properties
The effect of heat ageing on color change and optical properties of bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 4, 2018-2019, Pages 467-477]
Optimazation
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Organic compounds
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
Organizational entrepreneurship
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
ORIENTED STRAND BOARD
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018-2019, Pages 155-165]
Oxygen delignification
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018-2019, Pages 369-380]
P
Packaging
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Paper properties
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
Particleboard
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
PC number
The effect of heat ageing on color change and optical properties of bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 4, 2018-2019, Pages 467-477]
Pearson correlation
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018-2019, Pages 417-427]
PHYSICAL AND MECHANICAL PROPERTIES
The effect of using cellulosic Nanofiber and imported chemical pulp and paper on durable paper made of below comb fibers [Volume 33, Issue 3, 2018-2019, Pages 337-346]
Polyethylene
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Poly Lactic Acid
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Polyurethane
An Investigation into the Effect of Moisture Content on Adhesion strength of Half-polyester and Polyurethane Clear Paints Applied to Wood Surface [Volume 33, Issue 4, 2018-2019, Pages 511-521]
Poly (vinyl alcohol)
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Polyvinyl Alcohol
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Poplar
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
Poplar
Comparison of stiffness parameters of two kinds of date palm using nondestructive test [Volume 33, Issue 1, 2018-2019, Pages 133-141]
Poplar
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018-2019, Pages 290-299]
Precipitated Calcium Carbonate
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018-2019, Pages 311-322]
R
Refining
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Remzol Black B Dye
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Rheology
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Rhodamine B
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018-2019, Pages 280-289]
Rice straw
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
ROT
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018-2019, Pages 402-416]
S
Sawdust
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Self-assembly Layers
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
Silane
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Sodium Hypochlorite
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Sodium Hypochlorite
The effect of heat ageing on color change and optical properties of bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 4, 2018-2019, Pages 467-477]
Soluble and colloidal substances (DCS)
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018-2019, Pages 323-336]
Sound Velocity
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Soy protein
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018-2019, Pages 311-322]
Specific surface area
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Spruce and sycamore
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Stickies
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018-2019, Pages 256-269]
Strength
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018-2019, Pages 359-369]
Strength properties
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018-2019, Pages 290-299]
Strength properties
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Sunflower stem
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
T
Tehran
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
TGA
Thermal analysis by TGA and DTA method of wood-polymer of furfurylated beech and fir wood [Volume 33, Issue 4, 2018-2019, Pages 501-510]
Thermal properties
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Thickness swelling
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Tobacco stalk waste
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Tomography
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Tree
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
U
Ultrasonic
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Urea formaldehyde resin
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
V
VESSEL
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018-2019, Pages 417-427]
W
Warsaw Treaty
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018-2019, Pages 50-62]
Weighting
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Wood coating
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Wooden structures
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018-2019, Pages 402-416]
Writing and Printing Recycled Pulp Properties
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018-2019, Pages 311-322]
X
X-ray
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
Y
Yew bark
Extraction and Identification of Chemical Composition within Acetone Extract of Taxus baccata L. Bark [Volume 33, Issue 1, 2018-2019, Pages 88-99]